Recommendations and instructions
Recommendations
- It is recommended to wash the mask daily;
- Ensure that the mask is in good condition by performing a visual inspection;
- Avoid touching the inside of the mask to prevent contamination;
- It is recommended that you have no facial hair.
Instructions for putting on a DIV20 filter mask
- Before touching the mask, wash your hands;
- Take the mask in the palm of your hand, the nose part up;
- Send the upper elastic band behind your hand (above the hand) and take the lower elastic band in the other hand;
- Press the mask on the chin and pass the lower elastic band behind the head at the base near the neck;
- Then press the mask on the nose and pass the upper elastic band behind the head in the center;
- Take the two ends of the upper and lower elastic band and pull until the mask fits the shape of your face;
- With your index fingers, apply pressure to the nose on each side to ensure the optimal seal of the mask.
Instructions for removing a DIV20 filter mask
- Before touching the mask, wash your hands;
- Put the palm of your hand on the front of the mask (filtering part);
- Put one hand on the lower elastic band if there is otherwise on the upper band;
- Remove the mask by simultaneously pulling the mask and the elastic upwards;
- Wash your hands with soap and water for a minimum of 20 seconds after removing the mask;
Instructions for washing the DIV20 mask
- Remove the elastic band (s);
- Place the mask in the upper drawer of the dishwasher;
- Place the mask with the filter membrane upwards;
- Remove the mask so as to respect the natural shape of the mask (do not deform it);
- Once the cycle is finished, place on a clean surface and allow the mask to dry for a minimum of 3 hours before you can use it again;
- The mask can also be hand washed with mild soap.